S6001E UHF Wideband (72MHz) Receiver. The NEW Trantec S6001E is a single receiver version of the award-winning S6000 rack system, packaged in a 1/2 width 1U 19" rack box.
In common with its bigger brother the S6000 rack based system, the S6001E boasts an unprecedented impressive RF tuning range of 72MHz, covering the following frequency bands from 662-734 MHz, 734-806MHz and 798-865MHz.
It can be fully remote monitored and controlled via the USB port using the same PC monitoring software as both the S6000 and S6002 allowing the user to mix and match up to 40 receivers of different types and frequency ranges on the same PC screen. These receivers can then be monitored locally or anywhere on an Ethernet based network.
If used standalone it can operate with user defined frequency sets of up to 40 named channels, which can be programmed via the USB port, or custom programmed to individual frequencies via the data wheel on the front panel. Also on the front panel there is an Infra-Red (IrDA) port, which allows communication between the transmitter and receiver and will also allow configuration of the receivers via a Palm Pilot, which will also be able to programme the S6000 transmitter.
The RF inputs for up to 4 x 6001 receivers may be daisy chained from a single pair of diversity antennae
The units front panel display allows access to all the standard functions. These include frequency, User name, mute level, RF level A and B (diversity), deviation, Vu and last but not least constant battery monitoring. The S6001 is able to display all this information through the latest generation Vacuum fluorescent display (VFD) giving excellent clarity in all environments
TECHNICAL SPECIFICATION Trantec S6001E Receiver
Frequency Range 662-734MHz, 734-806MHz and 798-865MHz
Frequency Arrangement: 25kHz grid
RF Sensitivity: 0.3΅V for 12dB sinad
Image Rejection: 1st IF > 85dB, 2nd IF > 70dB
RF Input Impedance: 50 Ohms
RF 1dB Compression Point: -8dBm
S/N Ratio: >100dB (A-Weighted) at Ue=50΅V
Squelch: Infinitely Adjustable up to 30΅V
AF Frequency Response: 70Hz-18kHz
AF Output: 0dBm XLR, Transformer balanced
Distortion: < 0.2%
IF Bandwidth: 110kHz
Frequency Stability: < 10kHz
Dynamic Range: > 100dB (A) Weighted
Operating Voltage: 90 to 132 VAC or 180 - 264 VAC via an automatic switch (47 - 63 Hz)
Dimensions: 1/2 Width 1U 19" Format
Regulatory information: Fully meets requirements of ETS300-422/455 and FCC part 74