4 WAY TRANTEC S4.16 RACKED n READY RADIO MICROPHONE SYSTEM - available with any combination of handheld / beltpack transmitters (please state your preference in notes box when ordering).
The new Trantec S4.16 UHF system boasts a multi-function receiver, 16 selectable frequencies and the latest PLL quartz tuning technology, making it the ultimate choice when looking for a product that will address your demands now, and into the future. The S4.16 has 16 selectable frequencies incorporating the existing 4 licence free Channel 70 frequencies, already being used in the S4.4, allowing the user to operate up to 12 frequencies together intermodulation free. The receiver has detachable antennae to allow the use of antenna distribution and remote antenna for larger sets. The S4.16 system is available in Lapel and Aerobic versions, which can be switched for use with a musical instrument, plus a Handheld with a dynamic capsule. The S4.16 has a host of additional features including LEDs on the receiver showing Power On, AF Peak level, RF Level and Diversity Channel A or B. In addition, the diversity operation receivers have rear mounted detachable antennae and variable gain jack plug & balanced XLR output. The handheld version is fitted with a dynamic capsule and the beltpack has a locking 3.5mm jack plug. The transmitter battery life is in excess of ten hours. FEATURES – Trantec S4.16 racked n ready systems • 19 inch 1/2 Depth Professional Flight Case • 16 UHF Frequencies • Antenna distribution • Built in Power supply • Tested and ready to go The S4.16 gives the user the ability to run more frequencies, but we realise this means a potentially intimidating tangle of wires to connect if the antennae are to be distributed from a single pair. We have therefore come up with various assembled racks giving the user a "turnkey solution" for a set price. Included in this price are the receivers and transmitters (in any combination of beltpack or handheld), a professional quality 19 inch rack, power supplies, antenna distribution units, antenna head amps, 10m of antenna cable, antenna mounting kit and antenna stands. These come in 4, 8 and 12 way versions. TECHNICAL SPECIFICATION S4.16RX Receiver 16 Channel Capability RF Frequency Range: Channel 70 Frequencies; 863.150, 863.725, 864.150, 864.850MHz Channel 69 Frequencies 854.900, 855.900, 856.175, 856.575, 857.950, 858.200, 858.650, 859.500, 860.400, 860.900, 861.200, 861.750 MHz Audio Frequency Response: Handheld 80Hz-16kHz (+/-3dB), Belt pack 60Hz-16kHz (+/-3dB) Audio S/N Ratio: >96dBA Audio Output Levels: Variable to +10dBu via unbalanced 1/4 inch mono jack, +16 dBu via balanced XLR 3F Display: 4 position RF bar graph, AF Peak (Overload), Diversity A/B DC Input: 12V, 100mA Dimensions: 35 x 213 x 98mm Weight: 580g S4.16LTX Beltpack Transmitter 16 Channel capability Controls: Frequency select, On/Off switch, Lapel/Instrument select, Gain adjust Indicator: Battery status LED LP2 Lavalier microphone: Omni directional back electret condenser Operating voltage: 9v @ <50mA Operating time: approx 10 hours Power Output: Max 10mW Connectors: Audio input via 3.5mm jack socket Dimensions: 60 x 100x 30mm including belt clip Weight: 90 g Fully meets with requirements of ETSI 300-422/455, FCC part 74h S4.16MTX Handheld Transmitter 16 Channel capability Controls: Frequency select and On/Off switch Indicator: Battery status LED Capsule: High quality cardioid dynamic head Operating voltage: 9v @ <50mA Operating time: approx 10 hours Power Output: Max 10mW Dimensions: 280 x 50 max (including grille) Weight: 210g Fully meets with requirements of ETSI 300-422/455 FCC part 74h Fully assembled Trantec S4.16 Racked N Ready System package includes: - • 4 / 8 or 12 x 4.16 receivers • 4 / 8 or 12 x 4.16 transmitters in any combination of beltpack or handheld • Antenna distribution unit (ADU), appropriate for attached receivers • Rack Mounting trays • 2 x 10m antenna cable • 2 x antennae • 2 x antenna head amplifiers • 2 x antenna stands • Power supply allowing single power lead for assembled rack
|