Electrovoice EV ZX5 - 15 inch 2 way speaker system
Key Features - EV ZX5-60B • DVX3150 15 inch LF Transducer with Forced Air Cooling • ND2 2 inch Voice Coil, 1 inch Exit Neodymium Compression Driver • 60 degrees x 60 degrees Coverage Pattern • 600W Continuous (2400W) Power Handling • High Sensitivity, 132 dB Maximum SPL • Adjustable Monitor Angle (45 degrees or 55 degrees) • 3 Anchor Plates for Single Stud Fittings and 10 Integral Suspension Points • Available in Black or White • Full Line of Accessories The Electro-Voice Zx5 is the new standard of no compromise audio performance and versatility in a simple to use, compact package. At its heart are the transducers. First is the DVX3150 high performance low frequency transducer. EV used advanced computer aided design techniques to create forced air, directional voice coil cooling for high power and efficiency. Finite element analysis was used to optimize the suspension and magnetic structure for long, linear travel to provide low distortion and greater LF extension. These features and details, such as forged magnetic components and special materials, provide reliability with a 500W power rating in a lightweight transducer. Next is the ND2, a 2-inch voice coil compression driver based on neodymium motor structure to allow for maximum output while reducing size and weight to a minimum. Its precision phasing plug and titanium diaphragm provide better HF performance, while the integral heatsink provides cooling for high power output. The high tech enclosure uses injection-moulded high-impact polypropylene structural foam to make the Zx5 incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response. By design the Zx5 is also a perfect solution for stage monitors by allowing two angles (45 degrees or 55 degrees without any additional accessories. Two coverage patterns are available; 60 degrees x 60 degrees coverage for long throw and cluster applications, 90 degrees x 50 degrees coverage for wider coverage or shorter distances. The Zx5 is equipped with three anchor plates for rigging with single stud-fittings, along with two more possible anchor plate attachment points on the bottom. For permanent suspension or attaching brackets, the Zx5 also has two M8 inserts on the top and bottom, two under the handle, and four on the back of the enclosure, for a total of 10. All versions are available in black or white. Specification – Electrovoice ZX5 60B Freq. Response1(-3 dB) : 58 Hz - 18 kHz Freq. Range1(-10 dB) : 39 Hz - 20 kHz Rec. High pass Frequency : 36 Hz Axial Sensitivity : 98 dB (1W/1m) Max Calculated SPL : 132 dB Horizontal Coverage : 60 degrees Vertical Coverage : 60 degrees Rated System Power : 600W Continuous, 2400W Peak LF Power Handling : 500W Continuous, 2000W Peak HF Power Handling : 40W Continuous, 160W Peak LF Transducer : DVX3150, 15 inch (300mm) Driver HF Transducer : ND2, 1 inch (50.8mm) exit Neodymium Compression Driver Crossover Frequency : 1.5 kHz Nominal Impedance : 8 Ohms Minimum Impedance : 6.5 Ohms Connectors : Neutrik Speakon NL4 Enclosure Material : Polypropylene Structural Foam Suspension : Enclosure has locations for 5 Single Stud Attachment Plates and 10 Forged Steel Eyebolts - 2 on Top, 2 on Bottom, 2 on Side, and 4 on Rear of Enclosure Grille : Polyester Powder Coated, 16GA Galvanized Steel Environmental Spec : IEC 529 IP24 / IP44 (PI Version) Dim (H x W x D) : 692mm x 446mm x 411mm Net Weight : 22.2 kg Shipping Weight : 26.0 kg
|